Installation Instructions - Beko CFL7914S Manual

Installation Instructions

1. Fitted the two plastic wall
spacers supplied onto the condenser
at the back of the appliance by
rotating 1/4 turn.
2. Locate the appliance on a
smooth surface.
3. To ensure it is standing upright
adjust the two front feet by turning
clockwise or anti-clockwise, until it is
in firm contact with the floor. Correct
adjustment of feet avoids excessive
vibration and noise.
4. A special receptacle is supplied
to store the mains plug during transit.
The receptacle is fixed at the back
of the cabinet on the side of the
compressor. Gently remove the plug
from the receptacle. Never pull the
mains cord, you may damage the
appliance. In case of transportation,
ensure you locate the plug in the
receptacle provided to avoid transit
damage.
5. The space in the room where
the appliance is installed must not
be smaller than 10 cubic metres.6.Fit
the front grille supplied with your
appliance as shown in the diagram.
Plug receptacle
14
EN