Reversing The Doors - Beko CFL7914S Manual

Reversing The Doors

1. Switch off the appliance at the
socket outlet and pull out the mains
plug.
2. Remove all loose items and
fittings and food, if any, from inside
the appliance and door racks.
3. Unscrew the bolts and remove
the middle hinge while holding doors.
(1)
4. Remove the fridge door from
the top hinge. (2)
5. Remove the freezer door. (3)
6. Remove the plastic covers on
the front top trim. (4)
7. Unscrew the bolts of the top
hinge and remove top hinge. (5)
8. Reposition plugs on the
opposite side. (6)
9. Remove the kick plate. (7)
10. Carefully tilt the appliance on
its back. (8) (You may need somebody
to help you.)
11. Unscrew and remove the left
hand side front feet. (9)
12. Unscrew and remove the
bottom hinge. (10)
13. Remove the plastic cover and
fit the tap which is in the plastic bag
to the other side. (11)
14. Unscrew and remove the
middle hinge bushing from fridge
door. (12)
15. Screw and fix the new middle
hinge bushing which is supplied in
plastic bag to the other side. (13)
16. Reposition the hinge bushing
and the tap on the freezer door. (14)
17. Unscrew and reposition the
bottom hinge bushing. (15)
18. Unscrew bolt of the pin on the
bottom hinge. Fit the pin to the other
hole on the hinge and tighten the bolt
on the new position. (16)
19. Fit the bottom hinge and other
feet, and tighten the screws. (17)
20. Remove the plastic tap to the
opposite side on the front bottom
trim. (18)
21. Fit the front bottom trim to the
bottom hinge and other feet. (19)
22. Rotate the top hinge 180°.
Unscrew the hinge pin and re-tighten
it to the opposite side. (20)
23. Fit the top hinge and tighten
the bolts. (21)
24. Fit the plastic cover on the
front top trim. (22)
25. Locate the freezer door to
the bottom hinge and attach to the
cabinet. (23)
26. Locate the middle hinge on the
freezer door (24) and put the freezer
door between the top and middle
hinge carefully. (25)
27. Fit the middle hinge. Adjust the
doors and tighten the bolts. (26)
28. Fit the door handle to the
opposite side of the door and tighten
the bolts. (27)
29. Carefully stand your appliance
(you may need somebody to help you)
adjust the front feet.
30. Put back all, loose items and
fittings.
31. Wait for at least 4 hours to
allow the system to settle before
switching on.
32. Once the correct storage
temperatures have been reached in
the appliance, put back all the food.
16
EN