ASSEMBLING
AND
PREPAR
NG
19
Mounting
on a Table
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inches) (minimum)
space
from the wall for proper ventilation.
(Depending upon model.)
10 cm
(,4 inches)
2 Connect the power cord to a wail outlet.
_
CAUTION
, Do not place the TV near or on sources
'/
of heat, as this may result in fire or other
J
damage.
1
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
/
position, remove the bolts first.
2 Mount the wall brackets with the bolts to
the watl. Match the location of the wall
bracket and the eye-bolts on the rear of the
TV.
3
Connect the eye-bolts and wall brackets
tightly with a sturdy rope or cable. Make
sure to keep the rope parallet to the flat
surface.
[! hang_S
CAUTION
Make sure that children do not climb on or
on the TV.
_@
NOTE
• Use a platform or cabinet that is strong and
large enough
to support the TV securely.
• Brackets, bolts,and ropes are optional.You
I can obtain additionalaccessories from your