Overview Of Remote Control - Kogan Essendon User Manual

General Description

Overview of Remote Control

POWER
INPUT
1 2
4 5
7 8
0
INFO
FREEZE
MENU
OK/
REC LIST
DTV HDMI USB
MUTE
VOL
AUDIO LANG
RED GREEN YELLOW
INDEX HOLD SIZE
SUBTITLE MIX REVEAL
PgUp
SOUND PICTURE TIME
1. INPUT: This button is used to switch among
different sources: DTV,ATV, AV1, AV2, Component,
PC-RGB, HDMI1, HDMI2, HDMI3,USB.
Select a source and press OK button to confirm.
3
2. POWER: Press this button to switch to standby
mode, and press it again to turn TV on.
6
3. Digital buttons(0~9): To select channel with
9
digital buttons.
4. INFO: This button is used to start the "Current
RECALL
Service Banner" application that provides
SLEEP
information about the current service.
5. RECALL: Switch to the previous program.
6. FREEZE: Press this button to freeze the image.
7. MENU: Press this button to display main menu or
exit the menu. When you are in the submenu, you
can press it to return the main menu.
8. SLEEP: TV will be switched off automatically at
preset sleep time if you have set sleep timer. Use
your remote control to set the sleep timer.
ASPECT
Press SLEEP button on the remote control, then
press this button again to set sleep time: off, 10,
20,30, 60,90,120,180, 240 min. Press MENU
PROG
button to exit when you have set the sleep timer.
After you have set sleep timer, press SLEEP button
again, you will see the Remaining time.
BLUE
Notes: The sleep timer you have set will be
TEXT
Cancelled when the TV turns off or if a power
CANCEL
failure occurs.
PgDn
9. CH.LIST: Press it to show channel list on screen.
SUBCODE
10. FAV: Press it to display favorite list.
11. Arrow buttons: Press these buttons to move
cursor up/down/left/right for menu.
12. OK/REC LIST: Press this button to display a list
of recorded programs. In main menu and submenu
it is a validation button.
13. GUIDE: In DTV source, this button is used to
start the EPG application.
14. Exit: Exit the menu.
15. DTV: Switch to DTV mode.
16. HDMI: Switch to HDMI1 mode directly, press
twice to switch to HDMI2, press three times to
switch to HDMI3.
12