Advertisement
Servicing: Do not attempt to service this product yourself as removing covers expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Damage requiring service: Unplug this product from the wall outlet and refer
servicing to qualified service personnel.
Replacement Parts: When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
Safety Check: Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in proper
Eng
operating condition.
1. INTRODUCTION
This Dome camera is designed for use with REO Observation Systems only. It
combines a high sensitivity sensor with advanced digital signal processing, resulting in
a high quality Dome camera with excellent performance even under difficult
circumstances.
2. STANDARD PACKAGE INCLUDED
-
Screws x 2pcs
-
Dome camera x 1pc
-
Dual twisted pair cable - 15 metres x 1pc
-
DFU x 1pc
3. INSTALLATION (Refer to Fig. 1)
To obtain the best results from your new Dome camera, read these instructions
carefully before use. Retain the manual for future reference. Recommended for indoor
Application Only
This chapter describes the installation of the Dome camera. For more detailed
information about the installation and operation of the system monitor you should
consult the monitor manuals.
Remark: When the system configuration is altered, the system monitor needs to check and
memorise the cameras and accessories connected to its inputs. This is done automatically
when the mains power is switched on (rear switch).
4
Advertisement
