Samsung SWF-SQ1200 Service Manual page 6

6. TEMPERATURE SELECTION KEY
1) TEMPERATURE SELECTION KEY input is valid only when WASH is selected after
course selection.
2) On initial status without key input or on temporary pause mode, pressing the
OPTION SELECTION KEY can select one of the following options in the order as listed below.
95¡C 60¡C
3) Only 60¡C and 40¡C are available when DELICATE COURSE is selected.
4) Only 40¡C is available when WOOL COURSE is selected.
5) Only 40¡C and 60¡C are available when SPEEDY COURSE is selected.
7. DELAY START SELECTION KEY
1) DELAY START SELECTION KEY input is valid when more than one course is
selected among WASH, RINSE, SPIN, or COURSE and before START KEY is pressed.
2) This key is a sort of REPEAT KEY, reservation default value is 1 hour when
the selected process is less than total 1 hour, 2 hours when selected process is
more than 1 hour and less than 2 hours, and 3 hours when selected process is
more than 2 hours and less than 3 hours.
3) Pressing the DELAY START SELECTION KEY once increases the hold time by
1 hour and can set up to 19 hours max.
8. START/PAUSE KEY
1) START/PAUSE KEY input is possible when a course is already selected and
pressing the key toggles between the following modes.
START PAUSE
9. POWER ON/OFF KEY
1) POWER ON/OFF KEY input is always possible and pressing the key toggles between t
he following modes.
POWER ON
2) This POWER ON/OFF KEY performs reset function on ERROR.
This key removes ERROR by turning power off when error happened.
SAMSUNG ELECTRONICS Co., LTD
40¡C OFF
POWER OFF
2. FUNCTION OF THE FRONT CONTROL PANEL
4