Samsung SWF-SQ1200 Service Manual page 5

2. FUNCTION OF THE FRONT CONTROL PANEL
3. RINSE SELECTION KEY
1) Pressing the RINSE SELECTION KEY is valid after you selected a course or
when in a washing process, but not valid when in a rinsing or spin process.
2) On initial status without key input or on temporary pause mode, pressing the
RINSE SELECTION KEY can select one of the following options in the order as listed below.
2 3 4 OFF
3) After pressing PAUSE key whilst in a RINSING process, SPIN is valid but
WASH, RINSE, COURSE, or DELAY START are not valid.
4. SPIN SELECTION KEY
1) SPIN SELECTION KEY input is valid if not in SPIN process.
2) On initial status without key input or on temporary pause mode, pressing the
SPIN SELECTION KEY can select one of the following options in the order as listed below.
600 900 1200
3) Only 600 is available for DELICATE COURSE.
4) In case of WOOL COURSE, you cannot select SPIN mode but washing machine
automatically performs spinning by 200 RPM.
5) If RINSE HOLD or NO SPIN is selected, SPIN setting is automatically canceled and
it is restored when the RINSE HOLD or NO SPIN is deselected.
5. OPTION SELECTION KEY
1) OPTION SELECTION KEY input is valid only when WASH or SPIN is selected after
course selection.
2) On initial status without key input or on temporary pause mode, pressing the OPTION
SELECTION KEY can select one of the following options in the order as listed below.
WATER PLUS
OFF
3) SPIN is automatically canceled if RINSE HOLD or NO SPIN is selected.
4) Only WATER PLUS is available when WOOL course is selected.
3
OFF
RINSE HOLD NO SPIN WATER PLUS + RINSE HOLD WATER PLUS + NO SPIN
WASHING MACHINE