General - LG 27UD88 Owner's Manual

-General

1 to view the osD menu, press the joystick button at the bot-
tom of the monitor and then enter the Menu.
2
Go to by moving the joystick.
General
3 Configure the options following the instructions that appear in
the bottom right corner.
4
to return to the upper menu or set other menu items, move the
joystick to ◄ or pressing (
5
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Each option is described below.
Menu > General
Language Sets the menu screen to the desired language.
sMARt eneRGY High
sAVInG
Low
off
Power LeD turns the power LED on the front of the monitor on or off.
on
off
Automatic standby Feature that automatically turns off the monitor when there is no movement on the screen for a period of time.
You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H)
DisplayPort 1.2 Enables or disables DisplayPort 1.2.
y
note
Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor.If option of SMArt EnErGY
y
SAVInG is High or Low, monitor luminance become higher or lower depend on source.
/ OK) it.
Saves energy using the high-efficiency SMArt EnErGY SAVInG feature.
Saves energy using the low-efficiency SMArt EnErGY SAVInG feature.
Disables the SMArt EnErGY SAVInG feature.
the power LED turns on automatically.
the power LED turns off.
note
Be sure to configure this option according to the DisplayPort version supported by your graphics card.
Set this option to Disable if your graphics card does not support DisplayPort 1.2.
Quick Charge
Description
25