Using The Kensington Lock; Detaching The Stand Body; Installing The Wall Mount Plate - LG 27UD88 Owner's Manual

14
WARnInG
take care when rotating the monitor if the cable is
y
connected.
to avoid injury when rotating the display, do not place
y
your fingers between the display and the stand base.

Using the Kensington lock

the Kensington security system connector is located at the
back of the Monitor set.
For more information on installation and usage, refer to the
Kensington lock user manual or visit the website at http://
www.kensington.com.
Connect the Kensington security system cable between the
Monitor set and a table.
note
Use of the Kensington lock is optional.
y
accessories can be purchased at your local electronics
store.

Detaching the stand Body

1
Place the monitor's screen face down. to protect the
screen from scratches, cover the surface with a soft
cloth.
2
remove the stand from the monitor by pressing the but-
ton on the bottom center of the back of the monitor.

Installing the wall mount plate

this monitor supports the specification of the standard wall
mount plate or compatible device.
1
Place the screen face down. to protect the screen from
scratches, cover the surface with a soft cloth.
2
Place the wall mount plate onto the monitor and align it
with the screw holes.
3
tighten the four screws to fix the plate to the monitor
using a screwdriver.
note
the wall mount plate is sold separately.
y
For more information on installation, refer to the wall
y
mount plate's installation guide.
the
Be careful not to use excessive force when mounting
y
the wall mount plate, as this can damage the monitor's
screen.