Pbp - LG 27UD88 Owner's Manual

-PBP

1 to view the osD menu, press the joystick button at the bottom
of the monitor and then enter the Menu.
2
Go to PBP by moving the joystick.
3 Configure the options following the instructions that appear in
the bottom right corner.
4
to return to the upper menu or set other menu items, move the
joystick to ◄ or pressing (
5
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Each option is described below.
Menu > PBP
sub Displays the screens of two input modes on one monitor.
Main screen
(Left)
sound out
Changes the audio output in PBP mode.
swap toggles between the main screen and sub screen in PBP mode.
sub Full Converts the sub screen of PBP mode to the wide screen.
Ratio
Adjusts the aspect ratio of the main screen or sub screen.
Main Wide
original
sub Wide
original
note
When the Sub mode is Off, Sound Out, Swap, Sub Full, and ratio menus become disabled.
y
the Main/Sub options for ratio become disabled if there is no signal.
the optimal resolution for PBP mode is set automatically when PBP mode is set.
y
/ OK) it.
PBP Connection
HDMI 1
HDMI 2
DisplayPort
UsB-C
Displays the video to fit the PBP screen, regardless of the video signal input.
Displays the video in the aspect ratio of the video signal input on the PBP screen.
Displays the video to fit the PBP screen, regardless of the video signal input.
Displays the video in the aspect ratio of the video signal input on the PBP screen.
Description
sub screen (Right)
HDMI 1 HDMI 2
- -
- -
o o
o o
21
DisplayPort UsB-C
o o
o o
- -
- -