Sony MEX-M100BT Operating Instructions Manual page 36

Mounting the unit in the dashboard or
the cutout hole on boat
 Before installing, make sure the catches on both
sides of the bracket  are bent inwards 2 mm
( 3 / in).
32
 For Japanese cars, see "Mounting the unit in a
Japanese car" (page 36).
1
Position the bracket  inside the
dashboard, then bend the claws outward
for a tight fit.

2
Mount the unit onto the bracket , then
attach the protection collar .

CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The heatsink on
the left side of the unit remains hot right after
use.
Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.
36
GB
182 mm (7 1 /
53 mm (2 1 / in)
8
Catch
Inner console panel

Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
TOYOTA

in) Bracket
4
Existing parts supplied with
your car
NISSAN



Bracket

Existing parts supplied with
your car
Note
To prevent malfunction, install only with the supplied
screws .
Detaching and attaching the front panel
For details, see "Detaching the Front Panel"
(page 8).
Resetting the unit
For details, see "Resetting the Unit" (page 8).
to dashboard/center console
Bracket
to dashboard/center console
Bracket

