Panasonic AJ-SPD850P Menu Information page 7

Setup menus (continued)
USER menu <BASIC>
No./Item
008 This selects what information is to be
provided by the time code and other
DISPLAY SEL superimposed displays output from
the VIDEO OUT 3/SDI OUT 3
connector (optional).
0000 TIME : Data only.
(The data indicates the value for
whichever of CTL, TC or UB currently
selected by the COUNTER button.)
0001 T&STA :
Data and operation status.
0002 T&S&M :
Data, operation status and mode.
0003 T&RT : Data and REC TIME
0004 T&YMD :
Data and REC DATE (year/month/day)
0005 T&MDY :
Data and REC DATE (month/day/year)
0006 T&DMY :
Data and REC DATE (day/month/year)
0007 T&UB :
Data and user bit.
However, when UB has been selected
with the COUNTER button, the time
code is displayed after the user bit.
0008 T&CTL :
Data and CTL data.
However, when CTL has been
selected with the COUNTER button,
the time code is displayed after the
CTL data.
0009
0010
The time code and user bit recorded
on the card are displayed.
Notes:
• Mode display:
DVCPRO 50 (50 Mbps) = DVCPRO_50,
DVCPRO (25 Mbps) = DVCPRO,
DV = DV
• An error message appears if a warning
or error has occurred when "T&S&M"
has been selected as this setting.
• The recording duration and recording
time and date are displayed when the
DV format applies. The operating
status is displayed instead when the
DVCPRO50 (50 Mbps) or DVCPRO
(25 Mbps) format applies.
The underlined items indicates the initial setting.
Description
T&T : Data and time code.
VITC:
No./Item
This sets the position of the characters
009
on the horizontal plane for the time
code and other superimposed displays
CHARA H-POS
output from the VIDEO OUT 3/ SDI OUT
3 connector (optional).
0000
:
0004
:
0016 16
Note:
Characters may extend beyond the
edges of the screen.
This sets the position of the characters
010
on the vertical plane for the time code
and other superimposed displays
CHARA V-POS
output from the VIDEO OUT 3/ SDI OUT
3 connector (optional).
[525i system]
0000
:
0018
:
0022
Note:
When the DISPLAY SEL setting causes
characters to extend beyond the edges of
the screen, the setting value is changed so
that the characters are automatically
displayed in a position on the screen.
011 This selects the display type for the
superimposed display output from the VIDEO
CHARA TYPE OUT 3/SDI OUT 3 connector (optional) as well
as for displays such as the setup menu, etc.
0000 WHITE :
White characters against a black
background.
0001 W/OUT :
White characters with a black border.
Description
0
:
4
:
[625i system]
0 0000 0
: : :
18 0023 23
: : :
22 0028 28
45