Panasonic AJ-SPD850P Menu Information page 12

Setup menus (continued)
USER menu <INTERFACE>
No./Item
201 This selects whether the REMOTE
(9P) connector functions when the
9P SEL REMOTE button is lit.
0000 OFF :
Connector does not function.
0001 ON : Connector functions.
202 This sets the ID information to be
returned to the controller.
ID SEL
0000 OTHER
0001 DVCPRO
0002
Notes:
• ID information of any VTR except for
the DVCPRO's is set in OTHER.
• Select ORIG only when the unit has
been connected to the specified
controller.
204 This selects whether the RS-232C
connector functions when the
RS232C SEL REMOTE button is lit.
0000 OFF :
Connector does not function.
0001 ON : Connector functions.
205 These settings are for selecting the
RS-232C communication speed (baud
BAUD RATE rate). (Unit: Bps)
0000 300
0001 600
0002 1200
0003 2400
0004 4800
0005 9600
206 These settings are for selecting the
RS-232C data length. (Unit: bit)
DATA LENGTH
0000 7
0001 8
207 These settings are for selecting the
RS-232C stop bit length. (Unit: bit)
STOP BIT
0000 1
0001 2
The underlined items indicates the initial setting.
50
Description
ORIG
No./Item
208 These settings are for selecting the
none, odd or even for the RS-232C
PARITY parity bit.
0000 NON :
Parity bit is not used.
0001 ODD:
An odd number of bits is used for the
parity system.
0002 EVEN:
An even number of bits is used for the
parity system.
209 These settings are for selecting
whether the ACK code is to be
RETURN ACK returned when a command is received
from RS-232C.
0000 OFF : ACK code is not returned.
0001 ON : ACK code is returned.
Description