Summary of Contents for Wild tech WT-KLD-HID
-
Page 1: Table Of Contents
TABLE OF CONTENTS 1. Introduction 2. Safety Instruction 3. Description 4. Operation and Technical Specification 5. Lamp installation or replacement 6. Beam Angle 7. Troubleshooting Fixture Cleaning User Guide Широкий ассортимент оборудования ACME на www.maxlight.ru Professional Entertainment Technology... -
Page 2: Introduction
♦ Unit surface temperature may reach up to 85℃. Don’t touch the housing bare-hand Thank you for purchasing Wild Tech’s Cubist and Kaleido. during its operation. Turn off the power and allow about 15 minutes for the unit to cool... -
Page 3: Description
(LED on) (LED blinking) 3. Mains input with IEC socket and integrated fuse holder, connect the supplied mains cable here. WT-KLD-HID 4. Lamp compartment, to be opened with this screw. 5. Internal microphone Stand by Blackout the unit 6. ј” jack used to connect t he optional CA-8 controller. -
Page 4: Lamp Installation Or Replacement
No light Burned out lamp Install new lamp. WT-CUB-HID WT-KLD-HID Fixture too hot Allow to cool down. Improve air- 1. Loose the screws on the housing cover. flow around the unit. 2. Loose the screws of the lamp wire from terminator Sound too low to activate Increase volume. -
Page 5: Fixture Cleaning
8. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.