Heat Only Operation - Panasonic CS-TZ9SKEW Service Manual

4 REMOTE CONTROL RECEIVING SOUND OFF/ON MODE
The Remote Control Receiving Sound OFF/ON Mode will be activated if the Auto OFF/ON button is pressed
continuously for more than 16 seconds (4 "beep" sounds will occur at 16th seconds to identify the Remote
Control Receiving Sound Off/On Mode is in standby condition) and press "AC Reset" button at remote
control.
Press "Auto OFF/ON button" to toggle remote control receiving sound.
Short "beep": Turn OFF remote control receiving sound.
o
Long "beep": Turn ON remote control receiving sound.
o
After Auto OFF/ON Button is pressed, the 20 seconds counter for Remote Control Receiving Sound OFF/ON
Mode is restarted.

17.2 Heat Only Operation

17.2.1 How to Activate/Deactivate Heat only Operation
AUTO SW
is pressed
5s
Forced
Emergency
Cooling
Operation
Operation
Pit

To enable the "Heat Only" mode, press the AUTO OFF/ON SW for more than 8s and less than 11s, "Pit Pit"
sound will be heard, then release the AUTO OFF/ON SW and press remote controller CHECK button. A short
"Pit" sound will be heard. "Heat Only" mode is now enable.

To disable the "Heat Only" mode, press the AUTO OFF/ON SW for more than 8s and less than 11s, "Pit Pit"
sound will be heard, then release the AUTO OFF/ON SW and press remote controller CHECK button. A long
"Pit" sound will be heard. "Heat Only" mode is now disable.

To pump down the unit during Heat Only Operation press AUTO switch for 5 seconds.
The unit will operate under forced cooling
mode continuously if "AC reset" code is
not pressed to activate standby
8s
Heat Only
Forced
Mode
Heating
Enable/
Operation
Disable
PitPit PitPitPit
AC reset code CHECK
code
11s 16s
Remote
Remote
Control
Control
Number
Receiving
Switch
Sound
Mode
PitPitPitPit
AC reset code AC reset code
103
21s 26s
No *Operation
Setting Time Check
Mode Mode
Peet
AC reset code AC reset code
36s
Forced
Cooling
Operation
No