Filling The Detergent Dispenser - Zanussi ZDM17301SA User Manual

Filling the detergent dispenser

1. Press the release button (A) to open the lid
(B) of the detergent dispenser.
2. Put the detergent (approximately 15 g) in
the compartment (C). The compartment has
2 parts (D) and (E) that refer to different
quantities of detergent (15 g and 25 g). Put
detergent tablets in part (E) of the
compartment.
C
D
E
3. Close the detergent dispenser. Press the lid
until the release button locks into position.
4. If the programme has a prewash phase, put
a small quantity of detergent (approximately
3 g) on the lid of the detergent dispenser.
Detergent tablets do not fully
dissolve with short programmes and
detergent residues can remain on
the dishes when the programme is
completed.
We recommend that you use
detergent tablets with long
programmes.
www.zanussi.com
A B
Using again separately detergent, salt
and rinse aid
1. Fill the salt container and the rinse aid
dispenser.
2. Start a programme without loading dishes.
3. When the programme is completed, adjust
the position of the rinse aid dispenser.
Use of rinse aid
CAUTION!
Only use rinse aid specifically
designed for dishwashers.
Rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically
released during the last rinsing
phase.
Filling the rinse aid dispenser
1. Turn the cap (F) counterclockwise and
remove it.
2. Fill the rinse aid dispenser (G) with rinse
aid. The mark ''MAX'' shows the maximum
level.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much foam
during the programme.
4. Put the cap on again and turn it clockwise
until it locks. Make sure that the signs on
the cap and on the dispenser are aligned.
F
G
9