Table of Contents
Advertisement
3. Press on/off button to activate the
appliance.
4. To set a programme, press Programmes
until the indicator of the selected
programme comes on.
5. Press Start / Pause to start the programme.
Starting a programme with Delay Start
1. Close the appliance door.
2. Open the water tap.
3. Press the on/off button to activate the
appliance.
4. Set a programme.
5. Press Delay Start to delay start of a
programme by up to 24 hours.
The pre-wash indicator comes on.
6. Press Start / Pause to start the countdown.
":" symbol flashes.
When the countdown is completed, the
programme starts automatically.
Cancelling Delay Start
1. Press Start / Pause.
2. Press Delay Start until 0 comes on.
3. Press Start / Pause. The programme starts
automatically.
Interrupting a programme
1. Open the appliance door.
The appliance stops.
Daily Use
Use of the appliance
1. Fill the salt container with salt for
dishwashers.
2. Fill the rinse aid dispenser with rinse aid.
3. Load the basket.
4. Open the water tap.
5. Set the correct programme for the type of
load and the degree of soil.
6. Add the detergent.
7. Start the programme.
Use of dishwasher salt
Hard water contains a high quantity of minerals
that can cause damage to the appliance and
bad washing results. The water softener
neutralises these minerals.
Contact your local water authority for
information about the hardness of the water in
your area.
www.zanussi.com
2. Close the appliance door.
The programme continues from the point of
interruption.
Cancelling a programme
Press and hold on/off button for about 3
seconds to cancel the programme.
Make sure that there is detergent in
the detergent dispenser before you
start a new programme.
End of a programme
When a programme is completed, an
intermittent acoustic signal sounds for
approximately 8 seconds.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
• Let the dishes become cold
before you remove them from the
appliance. Hot dishes can be
easily damaged.
• There can be water on the sides
and on the door of the appliance.
Stainless steel becomes cool
more quickly than the dishes.
CAUTION!
Only use salt specifically designed
for dishwashers. Other types of salt
will cause damage to the appliance.
Filling the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container
(Only for the first time).
3. Use the funnel to fill the salt container with
dishwasher salt.
7
Hide quick links:
Advertisement
Table of Contents
