Operation Screen; Other Functions Screen - Panasonic AG-HMC150P Operating Instructions Manual

Setup menu list (continued)

OPERATION screen

Item
DELETE (PB)
INDEX (PB)
CLIP PROTECT (PB)

OTHER FUNCTIONS screen

Item
IR REMOTE (Camera)
(PB)
REC LAMP (Camera)
BEEP SOUND (Camera)
CLOCK SET (Camera)
(PB)
98
Display
mode
Deletes clips.
ALL CLIPS: Deletes all clips.
SELECT:
NO:
• Clips for which CLIP PROTECT is specified are not deleted.
Adds indexes to clips or deletes them.
YES: Adds or deletes indexes.
NO: Returns to the last screen.
Protects clips to prevent accidental deletion.
YES: Enables clip protection or cancels protection.
NO: Returns to the last screen.
• Executing a format of the memory card (page 32) will delete all clips even if
they are protected.
Display
mode
Sets the operations of the supplied remote control unit.
ON: Accepts commands from the remote control.
OFF: Operations are not accepted from remote control.
Sets lighting of the tally lamp.
FRONT: Front tally lamp (microphone side) lights.
REAR: Rear tally lamp (viewfinder side) lights.
BOTH: Both tally lamps light.
OFF: The tally lamp does not light.
Turns the beep sound ON or OFF.
ON OFF
When ON is selected the beep is sounded, if the memory of the SD Memory
Card has been used up during recording.
When the beep is sounded, the audio signals from the output connector are
muted before the beep sound is output.
Sets the camera-recorder's calendar.
Description of settings
Deletes only the selected clips. Press the EXEC button to delete
clips.
Returns to the last screen.
Description of settings
indicates the factory setting.