Panasonic AG-HMC150P Operating Instructions Manual page 101

Recording
Cannot record even
through the SD Memory
Card is inserted correctly.
Recording stops by itself.
Editing
Cannot read the data on the
SD Memory Card.
Cannot perform nonlinear
editing.
Cannot dub onto an
external device.
Displays
Something is wrong with
the time code display.
Playback
Cannot play even when I
press the play button.
Mosaic-like noise appears
when I cue or review a clip.
Images do not appear on
the television even though
I have connected the
camera-recorder properly.
Cannot hear any sound
from the camera-recorder's
speaker.
• Is the write-protect switch on the SD Memory Card in the "LOCK"
position? The card cannot be recorded to if the switch is in the
"LOCK" position.
• Is the remaining memory available on the SD Memory Card
extremely low? Please save contents onto different media and
delete unneeded data from the card, or use a new card instead.
• Has the SD Memory Card been correctly formatted? Alternatively, is
the card of a format that is incompatible with this camera? Reformat
the card with the camera.
• 8 MB - 16 MB SD Memory Cards cannot be used.
• Is your SD Memory Card compatible with use for video recording?
Always use an SD Memory Card compatible with use for video
recording.
• Make sure the SD Memory Card is formatted correctly.
If it is not, format the card in the unit.
• Check the specifications of your computer and connecting cable.
• Make sure the external device is connected correctly.
• The time code display may not register a regular count if a clip is
played in the reverse slow mode. This is normal.
• Make sure the PB lamp is on (press the mode button).
No kind of playback operation can be performed unless this lamp
is on.
• This noise is inherent to digital video technology. This is normal.
• Make sure the input selector on your television is set to video input.
Read the television's instructions carefully and select the correct
video input connector for the camera-recorder.
• You may have turned down the camera-recorder's volume control
too far.
Adjust the volume level using the AUDIO MON/ADV button +.
P33
P32
P9
P9
P32
P75
P72
—
P59
—
—
P70
(Continued on the next page)
101