Table of Contents
Advertisement
DVD Player Error Messages
The chart on the right explains the
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the
disc.
Insert a different disc. If the new disc
plays, there is a problem with the
first disc. If the error message cycle
repeats and you cannot clear it, take
your vehicle to a dealer.
Error Message
Cause
FOCUS Error
DISC ERROR
MECH ERROR
Mechanical Error
High Temperature
HEAT ERROR
Invalid region code
REGION ERR
PARENT ERR
Invalid parental
control level
Rear Entertainment System
Solution
Press the disc eject button, and remove the disc.
Check for an error indication. Insert the disc again.
If the code does not disappear or the disc cannot be
removed, consult your dealer.
Press the disc eject button, and remove the disc.
Check for an error indication. Insert the disc again.
If the code does not disappear or the disc cannot be
removed, consult your dealer.
Will disappear when the temperature returns to
normal.
The disc is not playable in this unit. Eject the disc,
and insert a disc compatible with this system.
Reinsert the disc, and increase the parental control
level (see page 331).
CONTINUED
337
Advertisement
Table of Contents
