Playing a USB Flash Memory Device (Models with navigation system)
To Play a USB Flash Memory
Device
This audio system can select and
play the audio files on a USB flash
memory device with the same
controls used for the disc player. To
play a USB flash memory device,
connect it to the USB adapter cable
in the console compartment, then
press the USB/AUX button until you
see ''USB'' in the display. The
ignition switch must be in
ACCESSORY (I) or ON (II) position.
288
The audio system reads and plays
the audio files on the USB flash
memory device in MP3, WMA or
ᤳ
ACC
formats.
ᤳ : Only AAC format files recorded
with iTunes are playable on this
audio unit.
The recommended USB flash
memory devices are 256 MB or
higher, and formatted with the FAT
file system. Some digital audio
players may be compatible as well.
Some USB flash memory devices
(such as devices with security
lockout features, etc.) will not work
in this audio unit.
NOTE:
Do not use a device such as a card
●
reader or hard drive as it or your
files may be damaged.
Do not connect your USB flash
●
memory device using a hub.
Do not use an extension cable to
●
the USB adapter cable equipped
with your vehicle.
Do not keep a USB flash memory
●
device in the vehicle. Direct
sunlight and high heat will damage
it.
We recommend backing up your
●
data before playing a USB flash
memory device.
Some devices cannot be powered
●
or charged via the USB adapter, if
this is the case use the accessory
adapter to supply power to your
device.
Depending on the type and
●
number of files, it may take some
time before they begin to play.