Philips Brilliance BDM4350 User Manual page 12

2. Setting up the Display
MultiView in OSD menu
• PIP / PBP Mode: There are five modes for
MultiView: [Off], [PIP], [PBP 2Win], [PBP
3Win] and [PBP 4Win].
[PIP]: Picture in Picture
Open up a sub-window side-
by-side of other signal source.
When the sub source is not
detected:
[PBP 2Win]: Picture by Picture
Open up a sub-window
side-by-side of other signal
sources.
When the sub source is not
detected.
[PBP 3Win]: Picture by Picture
Open up two sub-windows
of other sources.
When the sub sources are
not detected.
B
A
(main)
B
A
(main)
A B
(main)
A
(main)
B
A
(main)
C
A
(main)
10
[PBP 4Win]: Picture by Picture
Open up three sub-windows
of other signal sources.
When the sub sources are
not detected.
Note
The black strip shows on the top and the
bottom of the screen for the correct aspect
ratio when in the PBP mode.
• PIP Size: When PIP is activated, there are
three sub-window sizes to choose: [Small],
[Middle], [Large].
• PIP Position: When PIP is activated, there
are four sub-window positions to choose.
Top-Right
B
A
(main)
Top-Left
A B
(main)
C D
A
(main)
B
Small
A
Middle
Large
(main)
Bottom-Right
A
(main)
B
Bottom-Left