What If I Can't Access The Factory Reset Option; Changing Your Roku Channel Store Pin Preference; Getting System Updates - Hitachi 55R7 Owner's Manual

What if I can't access the Factory Reset option?

It is possible that your TV might get into a state where you cannot access the various menus, including the menu option
that lets you perform a factory reset operation. If that happens, you can force the TV to reset by following these steps:
1. Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector
panel.
2. Continue to hold the RESET button for approximately 12 seconds.
When the reset cycle completes, the status indicator comes on dim.
3. Release the RESET button. The TV is now powered off.
4. The TV will then turn on automatically and you can proceed through the Guided Setup. See
on page 11.

Changing your Roku Channel Store PIN preference

When you created your Roku account, you were given the opportunity to create a PIN code and to specify when it must
be used. If you created a Channel Store PIN and want to change it, or you don't remember your PIN, or if you didn't cre-
ate a Channel Store +PIN and want to add one, you can easily make these changes.
1. On a computer, tablet, or smartphone, use your web browser to go to https://my.roku.com.
2. Enter your email address and password to sign in. After signing in, the My Account page appears.
3. Under PIN Preference, click Update to open the Choose Your PIN Preferences page.
4. Skip this step if you just want to change your PIN. Otherwise, choose the option your prefer from among those
listed:
• Require a PIN to make purchases or to add any item from the Channel Store.
• Require a PIN to make purchases.
• Do not require a PIN to make purchases.
5. If you choose either of the first two options, enter your PIN twice in the appropriate boxes.
6. Click Save Changes to save your changes and return to the My Account page. Note that your current setting is
described under PIN Preference.

Getting system updates

If your TV is connected to the Internet and linked with a Roku account, it will automatically get updates from time to
time. You don't need to do anything. But if you are aware that an update is available and you don't want to wait until the
TV updates itself, you can manually check for updates.
If your TV is not connected to the Internet, you can still get updates by using a USB flash drive.
You can download an updated Owner's Guide that matches your Roku TV software version from the Hitachi America, Ltd.
web site at: www.hitachi.us/tv
59
"Setting up your TV"