Connections And Setup; Set Up Your New Tv - Hitachi 55R7 Owner's Manual

Connections and setup

Set up your new TV

Remove your TV from the box
Be careful, it's heavy!
To mount on a wall
Before wall mounting, please carefully check the location of the TV's mounting-holes.
Follow the instructions that come with the wall mount.
Contact the retailer where you purchased the TV for advice, and have the equipment professionally installed.
Incomplete or improper installation may cause injury to you, and/or damage to the TV. ISO M6 x12 thread type
screws should be used. The insertion length must be within 10~13mm. If the insertion length is less than or more
than specified above, the weight can not be maintained or a space is created between the Wall Mount Bracket
and the Television.
(Insertion Length) = (Screw Length) - (Washers Thickness) - (Mounting Bracket Thickness)
Note: The wall mount bracket and the screws are not included.
Note: Store the stand and stand screws in a safe place in case you decide to use the stand in the future.
To use the stand
To prevent damage to the screen, carefully place your TV on a soft, cushioned surface.
A
Put the column of the stands into the TV, align the stands with the screw holes located on the TV.
B
C Secure the stands to the TV with four (4) screws.
A
B
Stands
L
C
Screws
3
L