3.3.3 Software control functions via OSD / control adjustable functions:
Please refer to following Hudson9 OSD definitions, if any deviation, then refer to PVT Exit sample.
ITEM
1
OSD DEFINITIONS
2
OSD LANGUAGES
3
OSD TREE
4
POWER ON LOGO
6
Register information
3.4
Horizontal scanning
Sync polarity
Scanning frequency
3.5
Vertical scanning
Sync polarity
Scanning frequency
0.1
2010/06/10
General Product Specification
: Positive or Negative
: 30 – 83 K Hz
: Positive or Negative
: 56 - 76 Hz
190E2plus
PHILIPS
190E2 LCD
Reset -
No: Exit
Yes: Auto adjustment for
displaying timing mode and
recall factory preset
9 LANGUAGES
Power On Logo: Power On
Show up Philips logo 3
seconds
Change to input signal.
This picture is reference
only. The official drawing
will send out by PM.
AC On/DC On register
information
-> Show register OSD 3
sec
-> Only to show first 5
times when AC or DC
power on/off
-> After reset in OSD, then
re-count 5 times again.
19" Wide 16x10 LCD Monitor
12 of 30
63