Interface - Philips 190E2FB/00 Service Manual

60 190E2 LCD
3.2

Interface

3.2.1 D-Sub Cable
Length
Fix with monitor when packing, with transplant pin protective cover.
Connector type : D-Sub male with DDC2B pin assignments.
Pin assignments:
3.2.2 DVI Cable (Do not required)
The input signals are applied to the display through DVI-D cable.
Length
Connector type : DVI-D male with DDC-2B pin assignments
0.1
2010/06/10
General Product Specification
: 1.8 M +/- 50 mm
Blue connector thumb-operated jack screws
PIN No. SIGNAL
1 Red
2 Green/ SOG
3 Blue
4 Sense (GND)
5 Cable Detect (GND)
6 Red GND
7 Green GND
8 Blue GND
9 DDC +3.3V or +5V
10 Logic GND
11 Sense (GND)
12 Bi-directional data
13 H/H+V sync
14 V-sync
15 Data clock
: 1.8 M +/- 50 mm
White connector thumb-operated jackscrews
190E2plus
PHILIPS
19" Wide 16x10 LCD Monitor
9 of 30