Step 1 : Connecting To A Tv - Panasonic DMP-BD85 Operating Manual (English, Spanish) Operating Instructions Manual

STEP 1 : Connecting to a TV

≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you temporarily
disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. Due
to copy guard protection the picture may not be displayed
properly.
≥ Refer to page 34, about recommended settings for each
piece of connected equipment.
Highest Quality
(VIDEO)
∫ Via an HDMI AV OUT terminal
HDMI IN
HDMI cable
≥ The HDMI connection supports
VIERA Link "HDAVI Control" (
when used with a compatible
Panasonic TV.
≥ Set "HDMI Video Mode" and "HDMI
Audio Output" to "On" (
8
VQT2H76
∫ Via a COMPONENT VIDEO
OUT terminal
COMPONENT
VIDEO IN
Component
Video cable
≥ Connect terminals of the same color.
22) ≥ Set "Component Video Resolution" to
"480p", "720p" or "1080i" (
≥ Set "HDMI Video Mode" to "Off"
( 28).
28).
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic's HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft) or less.
Recommended part number:
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
∫ Via a VIDEO OUT terminal
AUDIO IN
R L
Audio/Video
cable
(included)
≥ Connect terminals of the same color.
28).
Standard Quality
(VIDEO)
AUDIO IN
R L VIDEO IN
Audio/Video
cable (included)