Step 3 : Connecting To A Broadband Network - Panasonic DMP-BD85 Operating Manual (English, Spanish) Operating Instructions Manual

STEP 3 : Connecting to a broadband network

The following services can be used when this unit is
connected to broadband.
≥ Firmware can be updated (
≥ You can enjoy BD-Live (
≥ You can enjoy VIERA CAST (
∫ Using LAN (ethernet) cable
Broadband router, etc.
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
10
VQT2H76
14)
18)
23)
LAN Cable
LAN Cable
Modem
(Broadband)
*Provided by ISP
For details about connection method, refer to the instructions
supplied with the connected equipment.
≥ It may not work properly depending on the equipment or
environment used.
∫ Using Wireless LAN Adaptor (DY-WL10)
Wireless LAN Adaptor
(included)
Wireless router
(Access point), etc.
≥ Wireless LAN Adaptors other than the included Wireless
LAN Adaptor cannot be used.
≥ When connection conditions are poor, use the included
USB extension cable to connect the Wireless LAN Adaptor
provided with this unit.
≥ Do not use any other USB extension cables except the
supplied one.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.co.jp/pavc/global/cs
For additional information about this unit refer to
http://www.panasonic.com/consumer/support
Precautions of Wireless LAN Adaptor
The following limits are in place regarding the usage of this device. You must be
aware of these limits before using this device.
Panasonic will in no way be responsible for any incidental damage which may arise
due to a failure to obey these limits, or to any condition of use or disuse of this device.
≥ This device is to be used as a wireless LAN device.
≥ Do not use this device to connect to any wireless network for which
you do not have usage rights.
During automatic searches in a wireless network environment, wireless net-
works (SSID*) for which you do not have usage rights may be displayed; how-
ever, using these networks may be regarded as illegal access.
* An SSID (Service Set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID
matches for both devices.
≥ Data transmitted and received over radio waves may be intercepted
and monitored.
≥ This wireless LAN adaptor contains delicate electronic components.
Please use this adaptor in the manner in which it was intended and
follow the following points:
– Do not expose the adaptor to high temperatures or direct sunlight.
– Do not bend, or subject the adaptor to strong impacts.
– Keep the adaptor away from moisture.
– Do not disassemble or alter the adaptor in any way.
– Do not attempt to install the adaptor in any incompatible device.
LAN Cable
Modem
(Broadband)
*Provided by ISP