Windows 2000/Nt4.0 - Sanyo KA-PN04 Owner's Manual

Installation

Windows 2000/NT4.0

This example explains how to set the following network address.
IP Address
Subnet Mask
Gateway Address : 192.168.100.1
1
Select the Network and Dial-up Connections
menu from [Start] - [Settings] menu.
2
Click the Local Area Connection icon with right
button of the mouse and then select the
Properties menu from the popup menu. The right
window will appear on the screen.
3
Select the Internet Protocol(TCP/IP)
General tab of the "Local Area Connection
Properties" dialog window and then press the
Properties button.
4
On the "Internet Protocol (TCP/IP) Properties" dia-
log window, select the Use the following IP
address button and then enter the IP Address*
and Subnet mask.
5
Enter the Default gateway address.
This setting is not needed if the network does not pro-
vide the gateway (router).
6
Click the OK button, the setting window will be
closed.
To change the configuration, you may need administrator privileges.
*1 Select the "TCP/IP" item of the LAN card you use. If the "TCP/IP" item is not listed in the column,
you need to install the TCP/IP protocol. For further information refer to the user's manual of your
computer.
*2 If the network already has the TCP/IP protocol set, enter with the same IP network number for the
IP address and Subnet mask.
*3 There are some ways to set up the network depending on your computer's appearances.
18
: 192.168.0.5
: 255.255.255.0
on the
*1
2