Registering Portable Units - Panasonic KX-TCA391ALN Operating Instructions Manual

Registering Portable
Registration is necessary for portable units. A portable unit will be assigned the
number at registration. The portable unit number is used when paging and
transferring calls. You can register up to 4 portable units at the base unit.
You can not assign the same number to more than one portable unit. To
confirm the portable unit number, place the portable unit on the charger.
Make sure that the portable unit and base unit are in the standby mode.
Registration must be completed within 1 minute.
1
Base unit:
Press
(FUNCTION/EDIT)
2
Press .
(*)
• The IN USE indicator flashes.
3
Portable unit:
Press
(FUNCTION/EDIT)
4
Press or
to "Program", then press
5
Press or
points to "Unit option", then press
(Yes key).
OK
6
While "Assign" is at the arrow, press
(Yes key).
OK
7
Press or
portable unit number (1 to 4) is displayed.
(Ex. "2" is selected.)
• The selected number is displayed.
8
Press
OK
• A beep sounds on the base unit and portable unit.
• The IN USE indicator on the base unit goes out.
9
Press
(EXIT/CH)
• The portable unit number (1 to 4) will be displayed on
the portable unit.
until 2 beeps sound.
.
repeatedly until the arrow points
OK
repeatedly until the arrow
repeatedly until the desired
(Save key).
to return to the standby mode.
Units!
(Yes key).
– 3 –
11:34 AM 12/25
SAVE AUTO# ?
11:34 AM 12/25
UNIT ASSIGN
H
Save directory
Ringer volume
G F
H
Program
G F
Set recall time
H
Unit option
G F
H
Assign
Erase
G F
Unit No
H
G F
–2–
H
OK=Yes
H
OK=Yes
H
OK=Yes
H
OK=Yes
:2
OK=Save