Before Servicing The Computer; Disabling The Built-In Battery; 1010 Sim Card And Sim-Card Tray; 1020 Removable Battery - Lenovo ThinkPad T460 Hardware Maintenance Manual

Before servicing the computer

Carefully read this topic before servicing the computer.

Disabling the built-in battery

Before replacing any FRU, ensure that you have disabled the built-in battery.
For Windows 10 (and Windows 8.1), disable Fast Startup before disabling the built-in battery.
To disable Fast Startup for Windows 10, do the following:
1. From the desktop, type Power in the search box on the taskbar, and select Power Options.
2. Click Change what the power buttons do on the left pane.
3. Click Change settings that are currently unavailable at the top.
4. If prompted by User Account Control (UAC), click Yes.
5. Clear the Turn on fast startup check box, and then click Save changes.
To disable the built-in battery, do the following:
1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.
2. Turn on your computer. When the logo screen is displayed, immediately press F1 to enter ThinkPad
Setup.
3. Select Config ➙ Power. The Power submenu is displayed.
4. Select Disable built-in battery and press Enter.
5. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off
automatically. Wait three to five minutes to let the computer cool.

1010 SIM card and SIM-card tray

Note: Before you start the servicing, disable the built-in battery. See "Disabling the built-in battery"
on page 60.
Removal steps of the micro SIM card and micro-SIM-card tray

1020 Removable battery

Important notices for replacing a removable battery
Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out of their use.
60
ThinkPad T460 Hardware Maintenance Manual