Factory Default - Xoro HR5 8590 User Manual

scan, Transponder or Multi-Transponder which you want to start search.
3.2.1 Antenna Settings for Satellite
Press the VOL+/VOL- or OK button you can see the pre-stored Satellite list, in this
menu, you can execute Select, Add, Move, Delete, Rename Satellites.
3.2.2 Antenna Settings for Transponder
If you change the satellite, the transponder will be changed automatically. You will
find the transponder list of selected satellite here. In this menu, Press the
VOL+/VOL- or OK button you can see the pre-stored Transponder list, and you can
execute Select, Add, Delete, Edit , Delete All Transponders .
3.2.3 Search Channels from Satellite
You can search the channels by many search ways. It includes the Satellite Search,
Multi Satellites search, Blind Search, TP Search and Multi TP Search. You can
highlight the Start Search and select the search way that you want, then press the
OK button to confirm.
3.2.4 Antenna Settings for Motor
Menu-> INTALLATION ->Antenna Settings->Motor
Tip: Before you use USALS, you should go to Main Menu->SETTINGS->USALS
Setup to set your local position firstly.

3.3 Factory Default

You can restore the product to the factory default and you can also setup it
according to the wizard. It includes All, Channel List Only, Radio Channel Only,
Scramble Channel Only, TP Channel Only and SAT Channel Only options.
Warning: Please note that once you perform Factory Default all, all data and
settings will be deleted.
ENG 9