Using The Answering System - Panasonic KX-TG1855AL Operating Instructions Manual

Answering System Features
1
{j/OK}
2
{^}/{V}: "Answer System" i
{>}
3
{^}/{V}: "Settings" i {>}
4
{^}/{V}: "Remote Code" i {>}
5
To turn on remote operation, enter a
3-digit remote access code.
L To turn off remote operation,
press {*}.
6
{j/OK} i {ih}

Using the answering system

remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts,
enter your remote access code.
L The unit will announce the
number of new messages.
L After 3 seconds, voice guidance
starts.
3
Follow the voice guidance prompts
as necessary.
Note:
L You can hang up at any time.
Voice guidance
During remote operation, the unit's voice
guidance will prompt you to press {1} to
perform a specific operation, or press
{2} to listen to more available
operations.
Remote commands
You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
Key Operation
Repeat message (during
{1}
playback)
28
*1
Key Operation
Skip message (during
{2}
playback)
Play new messages
{4}
Play all messages
{5}
Play greeting message
{6}
Record greeting
{7}
message
Stop (recording,
{9}
playback)
Turn answering system
{0}
off
Erase currently playing
{*}{4}
message
Erase all messages
{*}{5}
Erase greeting message
{*}{6}
(during greeting message
playback)
End remote operation (or
{*}{#}
hang up)
*1 If pressed within the first 5
seconds of a message, the
previous message will be played.
Turning on the answering
system remotely
If the answering system is off, you can
turn it on remotely.
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
L A long beep will be heard.
3
Enter your remote access code
within 10 seconds after the long
beep.
L The greeting message is played
back.
L You can hang up, or enter your
remote access code again and
begin remote operation.