Panasonic Panafax UF-6200 Operating Instructions Manual page 15

No. Icon
- Used to start On-Hook
Dialing. (See page 61)
8
- Used to start Abbreviated
Dialing.
10
(See pages 51 and 58)
Keypad
- Used for manual number dialing, entering phone numbers, and numerical
entries.
12
Key
- Used to temporarily change the dialing mode to Tone when Pulse mode is set.
- Press this key to start activation.
13
- Press this button when you want
to stop communication,
15
registration operation, or audible
tone.
Status LED lamp (RED)
- Lights/Flashes when trouble occurs.
Lights: Machine has detected a trouble status
- No paper in the selected tray or toner has run out.
17
- Machine has detected trouble, such as paper misfed or jammed.
Flashes: Machine detected an alarm status
- No paper in the tray. (Tray not selected)
- Toner is getting low, etc.
One-Touch Keys (01-32)
- Used for One-Touch Dialing. (See pages 51 to 58)
Program Keys (P1-P8)
- Used to enter long dialing procedures or Group Dialing Number keys.
(See pages 81 to 86)
Character Keys
18
- The One-Touch Keys and Program Keys serve as character and symbol input
keys which are used to enter your LOGO, character ID and station name.
- Used to insert a space while entering LOGO, character ID and station name.
- Used to switch between upper and lower character set.
Contents
- Used to enter a symbol for LOGO, character ID and station name.
Use or to select the symbols.
Control Panel
No. Icon
- Used to separate the Sub-
Address from the telephone
9
number.
- Used to enter a pause when
entering or dialing a telephone
11
number, or to redial the last
dialed number.
- Used for copy operations.
14 (See page 75)
Active LED lamp (GREEN)
Flashes: When machine is
16
Lights:
Contents
active.
When the received fax
message is in memory.
15