Table of Contents
Advertisement
Both lamps
Blinking – the SIM card does not work. See
Trouble shooting guide on page 31.
The push button
Software version R32:
Turn on and turn off the relay.
Turn off Thermostat function if activated.
Press for 30 seconds to turn the unit off.
Software version R33 or higher
Turn on and turn off the relay.
Turn off Thermostat function if activated.
Press the button for 5 seconds and both lamps start to blink. Release the button. The unit
disconnects from the GSM network and turns off.
Status - SMS
Request for a status SMS is made by sending an SMS as follows:
1234#8# (1234=your Password) or by pressing UPDATE in the apps for Android and iPhone.
The unit return an SMS
In the app for Android telephones the information is read into the app and is shown graphically.
The SMS contains some of the information below, depending of the status of the u nit.
Text in SMS – example
*Ontech 9025 – Ver 34
Alarm:
1ab
1/IntTemp
Inputs:
1a
Units:
1*/23/21
2/15/--
3/21
Explanation
* indicates that the alarm function is activated. Ver 34 is the software
version.
This row appears only if there is an alarm unconfirmed.
Indicates the unit (in this example ID1) and the alarm inputs that has
been activated (A and B)
Indicates that a temperature alarm has been activated by the internal
temperature sensor and the ID no of the unit that triggered the alarm. If
the text is ExtTemp instead, it is the external sensor that has triggered
the alarm.
This row appears only if there is an active alarm sensor.
Indicate the unit and alarm sensor input that still is active.
Indicates which components there is in the system, the status of the
outlet and the temperature
1*/23/21 indicates that the master (ID1) outlet is activated (*), the
internal temperature sensor is 23 degrees and the external temperature
sensor is 21 degrees.
2/15/-- indicates an extra relay Ontech Relay 9015 with ID no 2, the
outlet is not activated and the internal temperature sensor is 15 degrees.
There is no external temperature sensor.
3/21 indicates an Ontech Alarmbox 9012 with ID no 3 and the
temperature sensor is 21 degrees.
-28 -
Advertisement
Table of Contents
