Dynamic Select - Mercedes-Benz COMAND Operating Instructions Manual

Call up the climate control menu (
X
To select Pre-entry Climate Ctrl. at
X
Departure Time: turn and press the control-
ler.
A rotary menu appears.
To select the setting: turn the controller.
X
The menu symbol, text and image show the
selected setting.
To exit the menu: press the % button.
X
Settings in the bottom bar of the cli-
mate control menu
Activating/deactivating climate con-
trol
This setting is made in the bottom bar of the
climate control menu.
Call up the climate control menu (
X
Slide 6 the controller repeatedly until the
X
bottom bar is activated.
To select O Climate Ctrl
X
press the controller.
The climate control is switched on O or off
ª depending on the settings.
If the climate control is switched off:
the climate control setting functions are
R
deactivated.
the blower is switched off.
R
the air recirculation flaps are closed
R
Switching cooling with air dehumidifi-
cation on/off
This setting is made in the bottom bar of the
climate control menu.
Call up the climate control menu (
X
Slide 6 the controller repeatedly until the
X
bottom bar is activated.
To select O A/C: turn and press the control-
X
ler.
Switch cooling with air dehumidification on
X
O or off ª.
i
The current status of the cooling function is
displayed in the climate control bar: A/C ON
– activated, A/C OFF – deactivated
( page 47).
Y
page 48). i
Deactivating the cooling with air dehumidi-
Y
fication function reduces fuel consumption.
Synchronizing the climate control set-
tings
Use O
mate control setting for all zones together O or
separately ª.
This setting is made in the bottom bar of the
climate control menu.
Call up the climate control menu (
X
Slide 6 the controller repeatedly until the
X
bottom bar is activated.
To select O Sync: turn and press the con-
X
troller.
Switch the synchronization function on O or
X
off ª.
For further information on synchronizing climate
page 48).
Y
control settings (see the vehicle Operator's
Manual).
On: turn and

DYNAMIC SELECT

General notes
You can use
following settings for the Individual drive pro-
gram:
Drive system
R
Suspension
R
Steering
R
Climate control
R
ECO start/stop function
R
In addition, current vehicle and engine data is
visualized via the two further
Engine Data
page 48).
Y
i
In a few countries, the ECO start/stop func-
tion is deactivated at the factory due to the
available fuel grade. In this case, the ECO
start/stop function is not available regardless
of the display in the multimedia system dis-
play.
The ECO Assist setting is available on
PLUG‑IN HYBRID vehicles.
In Mercedes-AMG vehicles, you can use
DYNAMIC SELECT
tings for the Individual drive program:
Drive system
R
Suspension
R
DYNAMIC SELECT
Sync (synchronization) to select the cli-
DYNAMIC SELECT
Vehicle Data
menus.
to configure the following set-
49
page 48).
Y
to configure the
and
Z