3.3 Storing names and
telephone numbers into
the phone book
For rapid access to frequently dialed numbers,
the base unit and handset provide the phone
book (50 items each).
L Items stored in the phone book can be copied
from the base unit to the handset (page 38).
3.3.1 With the handset
{v}
Make sure the handset and base unit are not
being used.
Press {Phone book} (soft key 1).
1
L The display shows the number of items in
the phone book.
Press {Add} (soft key 1).
2
3
Enter the name, up to 16 characters. See the
following character table for details.
4
Press {v}.
5
Enter the telephone number, up to 32 digits.
L To enter a pause, press {P} (soft key 1).
6
Press {v}.
Press {Save} (soft key 1).
7
L To program other items, repeat steps 2 to
7.
8
Press {OFF}.
To select characters with the dial keypad
Keypad
Characters
# & '
{1}
/
1
a b c
{2}
d e f
{3}
1
{OFF}
(
)
@ ,
– .
A B C 2
D E F 3
Keypad
Characters
g h i
{4}
j
k
{5}
m n o M N O 6
{6}
p q r
{7}
t
u v
{8}
w x
{9}
0 (Space)
{0}
To delete a digit.
{<}
(soft key 1)
Note:
L To enter another character that is located on
the same dial key, press {>} (soft key 1) to
move the cursor to the next space.
To delete a character/number
Press {<} (soft key 1).
L To erase all of the characters/numbers, press
and hold {<} (soft key 1).
3.3.2 With the base unit
L You can also send faxes using the phone
book (page 49).
{STOP}
{SET}
{MENU}
1
Press {MENU} repeatedly to display "PHONE
BOOK SET".
2
Press {*}.
L The display shows the number of items in
the phone book for a few seconds.
3
Enter the name, up to 16 characters. (see
page 30 for instructions).
4
Press {SET}.
5
Enter the telephone number, up to 32 digits.
6
Press {SET}.
L To program other items, repeat steps 3 to
6.
7
Press {MENU}.
3. Telephone
G H I
4
l
J
K L 5
s
P Q R S 7
T U V 8
y
z
W X Y Z 9
{<}{>}
35