Programming Features - Panasonic KX-FPG379 Operating Instructions Manual

8. Programmable Features

8.7 Programming features

{1}{1} Changing the ringer volume
{1} Low
{2} Medium
{3} High (default)
{0} Off
See page 27 for details.
{1}{2} Setting ringer tone for outside calls
To set the handset ringer tone from one of 7
patterns for outside calls. You can select "Tone
1" (default), "Tone 2", "Tone 3", "Melody
1", "Melody 2", "Melody 3" or "Melody 4".
{1} "Tone 1" (default)
{2} "Tone 2"
{3} "Tone 3"
{4} "Melody 1"
{5} "Melody 2"
{6} "Melody 3"
{7} "Melody 4"
{2} Playing back messages
See page 61.
{5} Setting voice enhancer feature
{1} "On"
{0} "Off" (default)
See page 32 for details.
{0}{1} Changing the handset display
contrast
You can adjust the handset display contrast.
{1} Level 1
{2} Level 2
{3} Level 3 (default)
{4} Level 4
{5} Level 5
{6} Level 6
Note:
L To change the base unit display contrast, see
feature #39 on page 71.
{0}{2} Setting the key tone
You can select whether or not key tones are
heard when keys are pressed. Includes
confirmation tones and error tones.
{1} "On" (default): You will hear key tones.
{0} "Off": Deactivates this features.
76
{0}{3} Setting auto talk feature
This feature allows you to answer a call by lifting
the handset off the base unit without pressing
{TALK} or {SP-PHONE}.
{1} "On"
{0} "Off" (default)
Note:
L If you subscribe to Caller ID service and want
to view the caller's information on the
handset display after lifting up the handset to
answer a call, turn OFF this feature.
{0}{4} Setting the Caller ID number auto
edit feature
{1} "On" (default)
{0} "Off"
See page 42 for details.
{0}{5}{1} Setting dialing mode
If you cannot make calls, change this setting
depending on your telephone line service.
{1}"Pulse": For rotary pulse dial service.
{2}"Tone" (default): For tone dial service.
Note:
L You can also program this feature with the
base unit (feature #13 on page 70).
{0}{5}{2} Setting the flash time
The flash time depends on your telephone
exchange or host PBX.
{1} "700ms" (default)
{2} "600ms"
{3} "400ms"
{4} "300ms"
{5} "250ms"
{6} "110ms"
{7} "100ms"
{8} "90ms"
Note:
L If the unit is connected via a PBX, PBX
functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for
the correct setting.
L You can also program this feature with the
base unit (feature #72 on page 73).
{0}{5}{3} Setting line mode
The line mode is preset to "B" and generally
should not be adjusted. If "Line in use" is not
displayed on the handset properly, the line mode
selection is incorrect. Set line mode to "A".
{1} "A"
{2} "B" (default)