Basic Features - Panasonic KX-FPC91 Operating Instructions Manual

Basic features!
Programming table
Code Display & Feature
SET DATE & TIME
#01
To set the date and time
YOUR LOGO
#02
To set your logo
YOUR FAX NO.
#03
To set your facsimile telephone
number
SENDING REPORT
#04
To print and check the sending
report for fax transmission results
FAX RING COUNT
#06
To change the number of rings
before the unit answers a call in the
FAX ONLY mode
REMOTE TAM ACT.
If you use the unit with an
answering machine, activate this
feature and set the remote
activation ID for remote operation
#12
to secure the remote operation for
the answering machine.
DIALING MODE
#13 If you cannot dial, change the
setting depending on your
telephone line service.
Features Summary
Settings
See page 15 for details.
mm/dd/yy
hh:mm
(2 digits for
each entry)
See pages 16 and 17 for details.
(Up to 30
characters)
See page 18 for details.
(Up to 20
digits)
"ERROR": The sending report will
ERROR
be printed only when fax
transmission fails (p. 37).
ON
"ON": The sending report will be
OFF printed out after every transmission.
This setting is also available after
activating the FAX ONLY mode
1, 2, 3, 4,
(p. 45). "5 EXT.TAM" is used when
5 EXT.TAM
using the unit with an answering
machine (p. 46).
To select "ON" and enter ID:
1. Press
2. Rotate
ON / ID=11
feature.
3. Press
4. Rotate
5. Press
6. Enter your ID from 1 to 5 digits,
OFF using 0–9,
7. Press
8. Press
"TONE": For tone dial service.
TONE
"PULSE": For rotary pulse dial
service.
PULSE
(The default setting is in bold type.)
How the unit operates
.
MENU
and select this
JOG DIAL
.
SET
to select "ON".
JOG DIAL
.
SET
and #.
.
SET
.
MENU
55