Remove The Problems; Appendix - Midea MWMFL070CDR Owner's Manual

Remove the problems

Display
Description
LED
Door is not closed properly.
Door lock
problem
Please call up service line if there are still troubles.
Tap is not opened or water
flows too slowly.
Inlet valve filter is blocked.
Water injecting
Inlet pipe is twisted.
problem while
If water is not supplied
washing
Please call up service line if there are still troubles.
Outlet hose is blocked or twisted
Drain problem
Drain pump is blocked
while washing
Please call up service line if there are still troubles.
Please call up the service line if there is any other problem.
Reason Solution
Restart after the door is closed.
Open the tap or wait till the
water supply becomes normal.
Check inlet valve filter.
Straighten the water pipe
Check the other taps in the
room.
Wash and straighten outlet hose.
Wash drain pump filter
P.28

Appendix

The label and sign on the fabric can help you to choose the best way to launder your clothes.
Normal wash Hand wash
40
Wa r m w a s h
(max 40℃ )
Gentle wash Do not wash
Iron
Cool iron(max 110 ℃ )
Dry clean
Warm iron.medium
Do not dry clean
Do not iron
(max 150℃)
Iron with cloth Dry after wash Warmly dry clean
Line Dry in shade Do not tumble dry
Steam Iron
To avoid fire,electrical shock and other accidents,please remember the following reminding:
- Only the voltage indicated in power label can be used. If you are not clear of the voltage
at home, please contact the local power bureau.
- When you are using the heating function, the maximum current through the washing
machine will reach 10A. Therefore, please make sure the power supply units (current,
voltage and cable) can meet the normal load requirements for the machine.
- Protect the power cord properly. Power cord shall be fixed well so that it will not trip the
people or other things and be damaged. Special attention shall be paid to the socket. It
shall be plugged into the sockets easily and attention shall be paid to the plug location.
- Do not make the wall-mounted socket overloaded or cable extended. Overloading of the
wiring may cause fire or electrical shock. Do not pull out power plug with wet hand.
- To ensure your safety, power plug shall be inserted into an earthed three-pole socket.
Carefully check and ensure that your socket is properly and reliably earthed.
Bleach Chlorine bleach Tumble dry. Medium
may be used (max 150℃ )
C
C
Tumble dry. Low heat
Chlorine bleach
(max 110℃)
Do not bleach
not be used
Dry clean normal cycle Tumble dry normal Drip dry
with any solvent
A
F
Dry clean normal cycle Hang to dry
Dry flat
petroleum solvent only
/Line dry
Line Dry No Wring
No machine wash
P.29