Play Mode - Samick SDP45 Owner's Manual

OnAutoTrk if you want to record more tracks, select OnAutoTrk and the internal computer will
assign the next recording track automatically.
OffAutoTrk if you want to select tracks by yourself, select Off AutoTrk function first, then
press the [TRACK] button on the panel to select the track you want.
SINGLE FINGER CHORD TYPE
In this page, you can decide your preferred Single Finger system.
Press [FUNCTION] button to select "ChrType?", press [ENTER] button to confirm, use [+/-]
button to select "Type 1" or "Type 2".
SINGLE FINGER Mode fingering makes it simple to produce beautifully orchestrated
accompaniment using major , seventh , minor and minor-seventh chords by pressing a minimum
number of keys in the Auto Accompaniment section of the keyboard.
PEDAL
(only when using the optional 3 levers pedal)
In this page, you can select the setting for 3 pedals. Press [FUNCTION] button to select "Pedal?"
Press [ENTER] button and use [+/-] button to select Normal or Custom.
Normal The 3 pedals will work as in an acoustic piano: Soft, Sostenuto, Sustain.
Custom The 3 pedals will be set with special controls for the Style section and will work with
the following functions: as in an acoustic piano: Fill In, Start/Stop, Sustain. This is
the default mode.

PLAY MODE

In this page, you can select the setting for the song. It is possible in fact to play the songs listed in
the USB disk.
Press [FUNCTION] button to select "PlayMod?". Press [ENTER] button to select and use [+/-]
buttons to select "Single" or "Loop".
Single The selected song will be played after the Play button is pressed and will stop at the
end of it.
Loop The selected song will be played after the Play button is pressed and will
automatically play all the following songs without stopping until the [PLAY] button
will not be pressed again.
STYLE ACCOMP.
In this page, you can select if you like to switch off the accompaniment tracks of the style. Only the
Drum lines and the Bass lines will be playing.
Press [FUNCTION] button to select "STYAcmp?". Press [ENTER] button to select and use [+/-]
buttons to select "AccompOn" or "AcompOff".
27