Storing The Panel Settings; Recalling The Settings - Samick SDP45 Owner's Manual

STORING THE PANEL SETTINGS

It is possible to load up to 20 panel registrations using the 5 Memory (M1 – M5) positions and 4
memory banks.
By pressing the [STORE/BANK] button four times, you can select 4 different banks. The display
shows the available memory banks [1 to 4 MmryBank].
The following panel settings can be saved: Left/Right Sounds, Volume levels, Pan settings, Tempo,
Octave, Effects, Style and keyboard mode. Other global parameters are also memorised.
- Select the desired style, tempo, sounds, volume and effects.
- Select the Memory Bank where to store the new settings by pressing a few times the
[STORE/BANK] button, for example BANK 3.
- Press and hold [STORE/BANK] button, and then press one of the [M1-M5] buttons where
to store the panel setting, for example M1.
- The LCD displays
The current panel settings are now stored in the memory in position BANK 3 – M1.
It is possible to repeat this procedure for all available positions.

RECALLING THE SETTINGS

By pressing the [M1-M5] buttons, the information you have stored previously can be recalled. Press
[STORE/BANK] button to access the Memory banks ( press a few times).
The LCD displays the panel settings and memory position number.
LOCK
By pressing the [LOCK] button, turns the LOCK function ON/OFF. Whe n the LOCK function is
ON, the sounds registrations stored in each memory location can be recalled, whilst the style
accompaniment settings will be LOCKED. The display shows the related indicator arrow:
21