Local Control - Samick SDP45 Owner's Manual

MIDI R2------Typical configuration for a Midi Accordion or Master keyboard. The sections are
set automatically as follows:
MIDI S0------Transmission Off
MIDI S1------Selecting R1 Ch
MIDI S2------Selecting Lf Ch
MIDI S3------Selecting R2 Ch
When selecting "MIDI S1-S3" mode, the transmission is enabled automatically, and use [+/-]
buttons or the numeric keypad to select MIDI channel (1-16) for which you want to specify a new
transmission.

LOCAL CONTROL

In this page, you can decide to send or not your music to the internal speaker system.
Press [FUNCTION] button to select "ALLLocl ?", press [ENTER] button to confirm, use [+/-]
button to select "Local On" or "Local Off".
Local ON Normal operation. Keyboard and Controllers are sent to the Sound Engine.
Local OFF There will be no sound produced by the brain's tone generator. MIDI function can
work as usual.
If you press [FUNCTION] button to select "ALLLocl ?", and you press the [+/-] buttons you can
select the following Local Functions:
KBDLocl? This configuration will set Local Control for the keyboard only. Use the [+/-]
buttons to select KBD On or KBD Off.
USBLocl? This configuration will set Local Control for the USB Song Player only. The
instrument will send the played notes only thru midi Out. . Use the [+/-] buttons to
select USB On or USB Off.
STYLocl? This configuration will set Local Control for the STYLE only. The instrument will
send the played notes only thru midi Out. Use the [+/-] buttons to select STY On or
STY Off.
AUTO TRACK RECORDING SYSTEM
This is a very useful system to automatically assign the Track number while doing Multi Track
Recording.
It is possible to turn on or turn off the AUTO TRACK function for recording mode.
The setting will be saved automatically when the power is off.
Press [FUNCTION] button to select "AutoTrk?" , press the [ENTER] button to confirm, and use
[+/-] button to select OnAutoTrk and OffAutoTrk.
R1 Ch 1
R2 Ch 4
Left Ch 2
Bass Ch 3
26