Napoleon PTH10PSS Manual,Instructions & Parts List page 9

WARNING : TO BE INSTALLED ONLY BY AN AUTHORISED PERSON
Step 7 ---- Check for leak
Your Patio Heater has been checked at all
factory connections for leaks, To check the
Connection of the gas hose/regulator/cylinder.
1) Make leak solution by mixing 1part liquid
dish soap and 3 parts water.
2) Spoon several drops (or use squirt bottle)
of the solution onto the gas hose/regulator
and regulator/cylinder connection.
3) Inspect the connections and look for bubbles.
4) If no bubbles appear, the connection is safe.
5) If bubble appear, there is leak, loosen and
re-tighten this connection.
Step 8---- Disconnect Cylinder
When Storing or Transporting
1). Turn off the heater
2). Turn off the valve of the cylinder.
3). Loosen the screw of cylinder and regulator.
4). Disconnect the cylinder from regulator.
Caution:
A leak test should be performed with soapy water
whenever connecting a new cylinder.
Never use a match to test for leaks.
If disassembly is required, a leak test should be
performed with soapy water upon re-assembly.
Never use a match to test for leaks.
13 13
9
ASSEMBLY ASSEMBLY
13 13