Night Owl HDA SERIES User Manual page 21

3. Using a drill bit slightly smaller than the included screw anchors, drill into the
mounting surface using the guide marks you placed in the previous step.
4. Insert the screw anchors.
5. Line up the camera base holes with the screw anchors. Holding the base in
place, insert screws and tighten until secure.
6. Once the base is screwed in place, make sure that the camera is securely
mounted by placing gentle pressure on the mount.
7. Adjust the camera housing to point in the direction of the area you would like
to monitor.
Chapter 4: Camera Installation
Don't feel like installing the
system yourself? Let InstallerNet
do the work for you! Contact us at
1-800-806-5513 or visit us at
www.NightOwlSP.com.
™
21