Table of Contents
Advertisement
Features Summary
Advanced features
How to set menu options
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
Programming table (cont.)
Code
Feature & Display
Setting the original mode
ORIGINAL
MODE=NORMAL
#58
To send or copy a document with
faint or dark writing, set this feature
before starting transmission or
copying.
Setting the message transfer
MESSAGE TRANS.
MODE=OFF
To transfer a recorded incoming
#60
message to another telephone
(p. 68).
Transfer greeting message
(checking, recording or erasing)
#61
TRNS-GREETING
CHECK
Setting the incoming message
monitor
ICM MONITOR
MODE=ON
#67
To hear an incoming message
(ICM) from the speaker when the
answering device is recording the
message.
76
(cont.)
ADVANCED MODE
PRESS SET
[±]
[±]
[±]
[±]
(The default setting is in bold type.)
!
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Note:
Step 3 may be slightly different depending on the
feature.
See page 69 for more details.
Settings
How the unit operates
"NORMAL": Used for normal
NORMAL
writing.
"LIGHT": Used for faint writing.
"DARKER": Used for dark writing.
LIGHT
This feature will return to the
normal mode after transmission
or copying.
DARKER
1. Follow steps 1 and 2 above.
2. Press
ON
3. Press
4. Enter the transfer telephone
number.
5. Press
6. Press
OFF
This feature can be turned on/off
from a remote location (p. 63).
See page 68 for details.
CHECK
RECORD
ERASE
If you select "OFF", you cannot
monitor the incoming message.
ON
OFF
+ or -
to select "ON".
w
.
w
.
p
.
Advertisement
Table of Contents
