Table of Contents
Advertisement
Features Summary
Advanced features
How to set menu options
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
Programming table (cont.)
Code
Feature & Display
Changing the fax activation code
FAX ACTIVATION
MODE=ON
If you use an extension telephone
#41
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 52).
Setting the message alert
MESSAGE ALERT
#42
MODE=OFF
To alert you with beeps when a
new voice message is recorded.
Setting the recording time alert
REC. TIME ALERT
MODE=OFF
#43
To alert you with beeps when there
is less than 60 seconds of
remaining recording time.
Setting the memory reception
alert
RECEIVE ALERT
MODE=ON
#44
To alert you with a beeping sound
when a document which has been
received is stored into memory due
to some existing problem.
74
(cont.)
ADVANCED MODE
PRESS SET
[±]
[±]
[±]
[±]
!
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Note:
Step 3 may be slightly different depending on the
feature.
See page 69 for more details.
Settings
1. Follow steps 1 and 2 above.
ON /
2. Press
CODE=? ? 9
3. Press
4. Enter your code from 2 to 4 digits,
using 0–9 and :.
5. Press
OFF
6. Press
Do not enter "0000".
If you hear slow beeps, press
ON
LM
and listen to recorded messages
(p. 59, 60). The beeps will stop.
OFF
If you hear slow beeps, erase the
recorded messages (p. 59, 60, 66).
ON
The beeps will stop.
OFF
If you are alerted by a slow
beeping sound, clear the printing
ON
problem and make sure the unit is
supplied with enough paper to print
the stored document. The beeps
will stop.
OFF
(The default setting is in bold type.)
How the unit operates
+
-
or
to select "ON".
w
.
w
.
p
.
ç
or
Advertisement
Table of Contents
