Panasonic KX-FC175AL Operating Instructions Manual page 14

Setup (Base Unit)
For replacement only
5
Remove the stoppers and tags from the new
ink film. Find the "T" shaped gear (blue).
Insert the blue core of the front ink film roll
6
into the right slot of the unit (
"T" shaped gear (blue) into the left slot of the
$
unit ( ).
Insert the rear ink film roll (
Turn the "T" shaped gear (blue) in the
7
direction of the arrow.
Make sure that the ink film is
wrapped around the blue core
at least once.
Correct
The ink film is not wrapped
Tight
around the blue core.
Blue core
8 Close the back cover securely by pushing
down on the dotted area at both ends (
Close the front cover securely (
The following will be displayed while the unit
is checking that there is no slack in the ink
film.
Display:
Note:
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
14
#
). Insert the
%
).
Incorrect
Slack
$
).
PLEASE WAIT
Stopper
New ink film
"T" shaped gear (blue)
T shaped
gear (blue)
2
Left
slot
Front ink
film roll
Reverse
#
).
2
Front cover
Stopper
Rear ink film roll
3
Blue core
T shaped gear (blue)
Ink film
1
Back cover
Display
Tags
Right
slot
1
Dotted
area