Text Stamp - Panasonic Workio DP-C405 Operating Instructions Manual

Text Stamp

The original can be copied with text printed.
Up to 32 characters, including A to Z, a to z, 0 to 9, symbols, @, . (Period), _ and space can be printed.
The font size is 2.1 mm x 3.1 mm.
1
Select "Text Stamp".
To display this screen, refer to steps 1 to 4 of
Basic Operation for Stamping (see page
62).
2
Select the Orientation of the original.
Select the orientation of the
original according to the
orientation of its characters
(vertical direction).
Select the orientation of the
original according to the
orientation of its characters
(horizontal direction).
3
Select the Stamp Position.
The text stamp is printed on
the bottom at the center.
The text stamp is printed on
the bottom right side.
The text stamp is printed on
the upper right side.
4
Select "Change".
Continued on the next page...
69