Maintenance And Service - Bosch GBH 2-23 REA Professional Original Instructions Manual

OBJ_BUCH-351-003.book Page 26 Wednesday, October 20, 2010 1:39 PM
26 | English

Maintenance and Service

Maintenance and Cleaning
Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and ventilation slots clean.
A damaged dust protection cap should be
changed immediately. We recommend hav-
ing this carried out by an after-sales serv-
ice.
– Clean the tool holder 1 each time after using.
Changing the Filter Element (see figure N)
In order to maintain the filter performance, the
filter element 24 of the dust box 9 must be
changed after approx. 15 operating hours.
– For removal of the dust box 9, push the two
unlocking buttons 11 and pull the dust box
downward out of the dust extraction 14.
– Remove the filter element 24 upward and in-
sert a new filter element.
– Reinsert the dust box into the dust extrac-
tion 14 from below again until it can be heard
to engage.
Note: If the filter element 24 is damaged (e.g.
holes, damage to the soft sealing material), it
must be replaced immediately. Working with a
damaged filter element can cause damage to the
power tool.
Also replace the filter element 24 when the vac-
uuming performance is insufficient, even when
the dust box 9 is empty.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
1 619 P07 078 | (20.10.10)
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Bosch Power Tools